(03) 9761 0299
Mobile 0418 543 201
Contact Us

All posts by Romar Elements

Happy Holiday Season!

It’s that time of year again and Romar Elements will be closed from the 20th of December and re-opening on the 8th of January.

From all the staff at Romar Elements, we wish you a relaxing holiday season and look forward to working with you in the New Year.

Does your area have poor water quality?

Poor water quality is quite common in areas with high mineral soils. The water collected in natural catchments can become saturated by minerals and impurities that then become a part of our household water supply. When this water is used in appliances, such as an electric hot water service, it can quickly corrode a heating element designed for less aggressive water.

Australian land, being a wonderfully rich source of metals and minerals, is renowned for just this type of problem, particularly in W.A and S.A.

There are a couple of things that can help assist the life of the heating element in a hot water service tank.

  1. A higher quality sheath material, such as Incoloy (not the typical copper sheath type)
  2. Sacrificial anodes, which will attract the corrosive impurities rather than the element itself (sacrificial anodes much be checked and often replaced regularly)
  3. A lower watts density element, which delivers the same heat, with less intensity

If you do live in an area well known for it’s water impurities, or notice that you seem to be replacing your heating elements yearly or even monthly, consider the above options when buying a new heating element.

Need more information about heating elements?

Please give our friendly staff at Romar Elements a call. We can help you solve your heating dilemmas!

Welcome back to Romar Elements 2019

We hope everyone had a safe and happy holiday break.

In 2019, Romar Elements will continue to focus on specialised work from the domestic and commercial industries, primarily manufacturing elements which cannot be sourced from the original manufacturer.

We hope 2019 will be a productive and enjoyable year for all.

Welcome back for 2017!

block pic for web

If you were lucky enough to get one, we hope everyone had a safe and happy holiday break.

Its 2017 and Romar Elements is well into the new year with custom Brewing Elements, Marine BBQ Elements, Vacuum Forming Elements and many more…

This year we will continue our focus on providing technical information, advice and variable manufacturing techniques which best suit the customers application.

As well as our custom products, some of our higher selling stock items of 2016 were:

Dog Wash elements – for Hydrobaths

Hot Water Urn elements

Commercial Steam Cleaner elements

Bain Marie elements – for food warmers

Bakery Proofer elements

BBQ elements

Do It Yourself elements – straight length element you bend to your requirements

If you need a heating solution for any application, send us an email or give us a call, our sales team are happy to help.

We hope 2017 will be a productive and enjoyable year for all.

Can’t find a replacement Heating Element for the oven or appliance you love?

These days, many customers are told that everything is made overseas and therefore their old appliance is useless if the heating element stops working. This is not always true.

Romar Elements is among the small number of Australian businesses today that still manufacture their own product. Staff at Romar are always happy to help customers find replacement heating elements for domestic, commercial and industrial applainces, machinery or equipment. And, because we design and manufacture our own products, we can replicate, custom design or use existing parts to refurbish the heating element you require.

We can give you a free, no obligation quote to manufacture a heating elements if you call/text or email a photo, measurements and quantity required.  If you decide to accept our quote, we will often need the old element to replicate. If this is not possible, we will require an accurate drawing and measurements, including any supporting accessories.

While some cheaper appliances may not be ecconomical to fix, there are many people who don’t want to lose a robust and dependable oven, hot water system, dryer or coffee machine…

So, if anyone tells you, “No one makes heating elements in Australia anymore,” call or email us – we are here to help.

Heating Elements for the Electrical Trade, Service Technicians, Appliance Repairers

Romar Elements has worked with many electrical service technicians over the years, to supply, custom made and stocked appliance heating elements for Zannussi, Roband, Hobart, Woodson, Birko, Fagor, Electrolux and more…

While some standard commercial heating elements are readily available in Australia today, sourcing non standard heating elements is becomming increasingly difficult in the light of decreased manufacturing in Australia. Romar Elements can manufacture an exact replica of 99% of commercial tubular heating elements.

As an electrical service technician you may work machinery or appliances, Romar Elements can hold stock on shelf for you, ready when you need it.

Romar also stocks assorted accessories such as cable, terminals, gaskets, controllers and more…

Give us a call, we are happy to have a chat about your requirements and how we can help.

Heating Element Delivery Australia Wide.

While Romar Elements is based in Melbourne Victoria, we can have your heating elements delivered anywhere in Australia.

All packages will be charged on weight, length, width and where the package is being delivered to. Most elements are within standard freight size and weight, however, some over length packages may be charged a little extra.

Our heating elements are delivered all over Australia:

  • Victoria
  • Melbourne
  • New South Wales
  • Sydney
  • Queensland
  • Brisbane
  • Northern Territory
  • Darwin
  • Western Australia
  • Perth
  • South Australia
  • Adelaide
  • Australian Capital Territory
  • Canberra

…and everywhere else in between.

Let us know if you need your element delivered, we will give you a  freight charge with your quote, so you know exactly what to expect.

 

 

Australian Made Heating Elements

At Romar Elements, we are focussed on giving the best customer service we can provide.

Your business may require a replacement heating element custom suited to a machine or appliance that cannot be off line for more than 24hours – we can help!

As an appliance technician or electrical contractor your customers want their heating appliances up and running as soon as possible – we can help!

If you are thinking about a new product that needs a heating solution – we can help!

If you:  need to replace an old, unusual element, need a free element quote, want to discuss a new element design, or need fast service, give us a call – we can help!

Servicing all Australian States and Territories: N.S.W, VIC, TAS, QLD, N.T, S.A, W.A

 

Heating Elements No Longer Available

Due to the vast imports of domestic and commercial tubular heating elements into Australia, we have, unfortunately, seen some  Australian heating element manufacturers close down, or decrease their manufacturing volume over the past couple of years. We will therefore keep a running list of heating elements that are listed as N.L.A (no longer available). These products will not be stocked items, however they will be available from Romar Elements.

This list will be updated as we recieved news of any tubular heating elements no longer manufactured in Australia. This list is a work in progress; if you know of commercial or domestic heating elements which you cannot purchase in Australia, call us for assistance, or simply send us a message, so we can add the item to the list.

N.L.A Elements can be found in our regular online catalogue for domestic oven heating elements.

Mobile Pet Wash Heating Element Spares

We are continually adding our range of heating element spares to this web site. There are so many different appliances and models that require heating elements that it is difficult to keep up with the fast changing ranges.
Today we are introducing our mobile pet wash element, which is commonly used in Aussie Pooch / Hydrobath ranges. This heater is made from a durable Incoloy metal and is an 1800W 240V element with built in thermowell for placing a temperature sensing thermostat.

Some customers need a different shape or wattage or fitting depending on their washing requirements; at Romar, we can make exactly what you need for your purpose. Give us a call or leave your details on our contact page and we will have one of our staff contact you within 24 hours.son48crop

Copyright 2024 © Romar Elements